The Rake starts at the top of the Bar Screen. Upon receiving a command, a timer cycle begins. The rake drops down sweeping the decline the track and opens up. At the end of the course the bar screen rake automatically stops by the switches located at the drums and sweeping descending track bottom and integrates with the net.
After several seconds the rake automatically moves up and cleans the net. When the Rake reaches the top of the Bar Screen, the rubbish is swept, removed and falls through the funnel into the dumpster. At the end of course the Rake stops by the switches located at the top of the rails. Cycle time timer starts counting the time until the beginning of the next cycle. The Operations timer can be changed manually depending on the water flow and the amount of rubbish. Furthermore, on the dashboard you will find a command switch that will operate on a set level, or by remote command.